This laser-optimized multimode fiber (LOMMF) cable provides backward compatibility with existing 50/125 equipment while providing the performance headroom required to support laser light sources and 10 gigabit applications. Optical Multimode 3 (OM3) fiber supports 2000 MHz/km EMB at 850nm, and provides 10 gigabit transfers up to 300 meters using an 850nm VCSEL source. This cable also provides the fire protection required to run within walls and air plenums without the need for conduit; the Low-Smoke Zero-Halogen jacket protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical.
10 Gigabit transfers up to 300 meters using 850 nm VCSEL source
LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip)
SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
Maximum Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Typical Return Loss: -25 dB
Buffer Material: PVC
Buffer OD: 900 ??m
Jacket Material: LSZH PVC (OFNR riser-rated)
Jacket OD: 1.8 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Maximum Tensile Load: 100 N/cm
Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
Crush Resistance: 750 N/cm
Impact Resistance: 1,000 cycles
Flex Resistance: 5,000 cycles
Attenuation at 1300 nm: 1.0 dB/km
Attenuation at 850 nm: 3.5 dB/km
Operating Temperature: -20??C to +70??C
Please Note: Attenuation testing performed in accordance with EIA/TIA-455-171A.
Specifications
Connector 1: LC Male Connector 2: SC Male Color: Aqua Length: 1 Meter (3.3 Feet) Strand Count: Duplex (2-Strand) Core/Cladding Diameter: Multi Mode 50/125 OM3 Jacketing: Standard Zipcord (OFNR) Attenuation: 850 nm: 3.5 dB/km or at 1300 nm: 1.0 dB/km
PartNo
Title
Stock
ListPrice
OurPrice
Qty
FIBER-SC-LC-50D-10G-01M
1 Mtr aqua 10G OM3 50/125 MULTIMODE DUPLEX FIBER CABLE SC TO LC 1M
