|
|
|
| We offer a big selection of MTRJ to SC fiber optic jumper cables to choose from. The MTRJ connector features an easy snap lock mechanism for easy installation and removal, while maintaining a secure connection. At the other end, the SC connector employs a push-pull locking connector that resists accidental pulling. All high-quality MTRJ to SC cables provided by Zulu Cable enable connectivity for bandwidth intensive uses including: audio, voice, file sharing, wide-area, Gigabit Ethernet, and ATM applications. With MTRJ to SC termination, this high-quality fiber optic patch cable is specifically designed for ethernet, multimedia, or communication applications. The MTRJ connector features an easy-to-use latch-type design similar to the RJ connector on a Cat5 patch cable, and is half the size of the SC connector. With its small footprint design, the MTRJ connector can increase the port density. The SC connector features a push-pull locking system.Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 62.5/125 multimode fiber, immune to electrical interference. |
| |
| Features |
| - Optical Multimode 1 (OM1) fiber supporting 200/500 MHz.km OFL at 850/1300 nm.
- MTRJ Connector Dimensions: 7.5mm Height x 9.5mm Width x 56mm Depth
- SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
- Maximum Connector Loss: 0.50 dB
- Typical Connector Loss: 0.30 dB
- Typical Return Loss: -25 dB
- Buffer Material: PVC
- Buffer OD: 900 ??m
- Jacket Material: PVC (OFNR riser-rated)
- Jacket OD: 2.8 mm
- Installation Tensile Load: 100 N (445 lbs)
- Long-Term Tensile Load: 50 N (222 lbs)
- Maximum Tensile Load: 100 N/cm
- Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
- Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
- Crush Resistance: 750 N/cm
- Impact Resistance: 1,000 cycles
- Flex Resistance: 5,000 cycles
- Attenuation at 1300 nm: 1.0 dB/km
- Attenuation at 850 nm: 3.5 dB/km
- Operating Temperature: -20??C to +70??C
- Please Note: Attenuation testing performed in accordance with EIA/TIA-455-171A.
|
|
| |
|
|
|
|
|
|
|
